diff --git a/frontend/Skyeye-sys-ui/src/api/device.js b/frontend/Skyeye-sys-ui/src/api/device.js
index c9fa317..fb9541c 100644
--- a/frontend/Skyeye-sys-ui/src/api/device.js
+++ b/frontend/Skyeye-sys-ui/src/api/device.js
@@ -41,9 +41,3 @@ export const uavUpdate = params =>
 // #endregion
 export const getLastStatus = params =>
   req('get', '/skyeye/payload/getLastStatus', params)
-// 雷达开启
-export const deviceControlTurnon = params =>
-  req('post', '/sar/control/turnon', params)
-// 雷达关闭
-export const deviceControlEndall = params =>
-  req('post', '/sar/control/endall', params)
diff --git a/frontend/Skyeye-sys-ui/src/api/task.js b/frontend/Skyeye-sys-ui/src/api/task.js
index 923e965..5218c3e 100644
--- a/frontend/Skyeye-sys-ui/src/api/task.js
+++ b/frontend/Skyeye-sys-ui/src/api/task.js
@@ -90,3 +90,9 @@ export const changeJobStatus = params =>
 
 export const execBrightnessexport = params =>
   req('post', '/jm/job/exec/brightness', params)
+// 雷达开启
+export const deviceControlTurnon = params =>
+  req('post', '/sar/control/turnon', params)
+// 雷达关闭
+export const deviceControlEndall = params =>
+  req('post', '/sar/control/endall', params)
diff --git a/frontend/Skyeye-sys-ui/src/lang/en.js b/frontend/Skyeye-sys-ui/src/lang/en.js
index c847c02..5ced186 100644
--- a/frontend/Skyeye-sys-ui/src/lang/en.js
+++ b/frontend/Skyeye-sys-ui/src/lang/en.js
@@ -88,6 +88,7 @@ export default {
     noExecutingTasks: 'No executing tasks',
     endTask: 'Ended Task',
     fly: {
+      isPowerOn: 'Is Power On',
       statusInfo: 'Flight Status Information',
       height: 'Height',
       speed: 'Speed',
@@ -171,6 +172,8 @@ export default {
     stopTaskConfirm: 'Are you sure you want to stop this task?',
     stopTaskSuccess: 'Task stopped successfully!',
     planArea: 'Planning Area',
+    startScan: 'Start Scan',
+    endScan: 'End Scan',
     direction: {
       left: 'Left',
       right: 'Right',
@@ -189,6 +192,8 @@ export default {
       loaderType: 'Please select loader type',
       ratio: 'Please enter ratio',
     },
+    radarTurnOnSuccess: 'Radar turned on successfully',
+    radarEndConfirm: 'Are you sure you want to end scan?',
   },
   device1Manage: {
     uav: 'UAV',
diff --git a/frontend/Skyeye-sys-ui/src/lang/zh.js b/frontend/Skyeye-sys-ui/src/lang/zh.js
index 4047d55..cbce1a5 100644
--- a/frontend/Skyeye-sys-ui/src/lang/zh.js
+++ b/frontend/Skyeye-sys-ui/src/lang/zh.js
@@ -87,6 +87,7 @@ export default {
     noExecutingTasks: '暂无执行中的任务',
     endTask: '结束任务',
     fly: {
+      isPowerOn: '是否开机',
       statusInfo: '飞行状态信息',
       height: '高度',
       speed: '速度',
@@ -176,6 +177,8 @@ export default {
     },
     uavline: "航线",
     createAirline: '创建航线',
+    startScan: '开始扫描',
+    endScan: '结束扫描',
     rules: {
       inputTaskName: '请输入任务名称',
       startAltitude: '请输入起飞点高度',
@@ -188,6 +191,8 @@ export default {
       loaderType: '请选择载荷类型',
       ratio: '请输入比例',
     },
+    radarTurnOnSuccess: '已开始扫描',
+    radarEndConfirm: '确定要结束结束扫描？',
   },
   device1Manage: {
     uav: '无人机',
diff --git a/frontend/Skyeye-sys-ui/src/views/home/components/device1-manage/index.vue b/frontend/Skyeye-sys-ui/src/views/home/components/device1-manage/index.vue
index d47c229..84e8a73 100644
--- a/frontend/Skyeye-sys-ui/src/views/home/components/device1-manage/index.vue
+++ b/frontend/Skyeye-sys-ui/src/views/home/components/device1-manage/index.vue
@@ -83,15 +83,25 @@
       height="100%"
     >
       <template v-if="queryForm.type === 'payload'">
-        <el-table-column prop="name" :label="$t('device1Manage.radarName')"> </el-table-column>
-        <el-table-column prop="type" :label="$t('device1Manage.radarType')"> </el-table-column>
-        <el-table-column prop="ip" :label="$t('device1Manage.ip')"> </el-table-column>
+        <el-table-column prop="name" :label="$t('device1Manage.radarName')">
+        </el-table-column>
+        <el-table-column prop="type" :label="$t('device1Manage.radarType')">
+        </el-table-column>
+        <el-table-column prop="ip" :label="$t('device1Manage.ip')">
+        </el-table-column>
       </template>
       <template v-else>
-        <el-table-column prop="name" :label="$t('device1Manage.uavName')"> </el-table-column>
-        <el-table-column prop="code" :label="$t('device1Manage.uavCode')"> </el-table-column>
-        <el-table-column prop="ip" :label="$t('device1Manage.ip')"> </el-table-column>
-        <el-table-column prop="createTime" :label="$t('device1Manage.createTime')"> </el-table-column>
+        <el-table-column prop="name" :label="$t('device1Manage.uavName')">
+        </el-table-column>
+        <el-table-column prop="code" :label="$t('device1Manage.uavCode')">
+        </el-table-column>
+        <el-table-column prop="ip" :label="$t('device1Manage.ip')">
+        </el-table-column>
+        <el-table-column
+          prop="createTime"
+          :label="$t('device1Manage.createTime')"
+        >
+        </el-table-column>
       </template>
 
       <el-table-column :label="$t('device1Manage.operation')" width="200">
@@ -111,7 +121,7 @@
               @click="editDevice(scope.row)"
             ></el-button>
           </el-tooltip>
-          <template v-if="queryForm.type === 'payload'">
+          <!-- <template v-if="queryForm.type === 'payload'">
             <el-tooltip
               class="item"
               effect="light"
@@ -142,7 +152,7 @@
                 @click="handleRadar(scope.row, 2)"
               ></el-button>
             </el-tooltip>
-          </template>
+          </template> -->
           <el-tooltip
             class="item"
             effect="light"
@@ -236,10 +246,12 @@
         </el-form>
       </div>
       <div class="btns" slot="footer">
-        <el-button @click="close" size="mini">{{ $t('common.cancel') }}</el-button>
-        <el-button type="primary" size="mini" @click="submitDevice"
-          >{{ $t('common.confirm') }}</el-button
-        >
+        <el-button @click="close" size="mini">{{
+          $t('common.cancel')
+        }}</el-button>
+        <el-button type="primary" size="mini" @click="submitDevice">{{
+          $t('common.confirm')
+        }}</el-button>
       </div>
     </dt-dialog>
   </dt-card>
diff --git a/frontend/Skyeye-sys-ui/src/views/home/components/twin-situation/index.js b/frontend/Skyeye-sys-ui/src/views/home/components/twin-situation/index.js
index 4aed69b..db148d8 100644
--- a/frontend/Skyeye-sys-ui/src/views/home/components/twin-situation/index.js
+++ b/frontend/Skyeye-sys-ui/src/views/home/components/twin-situation/index.js
@@ -12,21 +12,16 @@ import * as DT from 'dt-sdk'
 import moment from 'moment'
 import { connectWebSocket, disconnectWebSocket } from '@/utils/web-socket'
 import { ICON_MODE } from '@/enum'
-import { AmapImageryProvider, TencentImageryProvider } from '@/utils/map-provider'
-import { getResourceList } from '@/api/home'
-import { removeRefreshToken, removeToken } from '@/utils/auth'
 import { getWeatherInfo } from '@/api/user'
 import {
   flyTaskUavCommand,
   getRadarListData,
-  getTaskItemDetail,
   getTaskListData,
-  getUavListData,
   reRunTask,
   stopTaskFly,
   getExecJobs,
-  execBrightnessexport,
-  changeJobStatus
+  deviceControlTurnon,
+  deviceControlEndall,
 } from '@/api/task'
 import UavTarget from './uavTarget'
 import PicturesUpload from '../pictures-upload/index.vue'
@@ -58,6 +53,7 @@ let radarSceneEntity = {}
 let sceneEntity = {}
 let taskListResource = []
 let orthoManager = null
+let socketPositionIndex = 0
 const lang = window.localStorage.getItem('locale') || 'zh_CN'
 export default {
   name: 'TwinSituation',
@@ -214,7 +210,7 @@ export default {
           longitude: 123.232312,
           latitude: 23.232312,
         },
-        activeNames: ['3', '4'],
+        activeNames: [1, 4],
         activeTab: 'DEV',
         basicsInfo: {
           name: '无人机1',
@@ -246,22 +242,7 @@ export default {
             taskTime: '2024-12-27 15:00:00'
           },
         ],
-        statusInfo: {
-          dev: [],
-          gps: [],
-          imu: [],
-          dev2: {
-            isWork: true,
-            isLock: true,
-            cpuTemperature: 40,
-            spTemperature: 40,
-            txTemperature: 40,
-            ypTemperature: 40,
-            fpgaTemperature: 40,
-            storage: 80,
-            memory: 80,
-          }
-        },
+        statusInfo: [],
         chart: {
           data: [
             {
@@ -422,6 +403,10 @@ export default {
       },
       immediate: true,
     },
+    'imageInfos.brightness'(nv) {
+      // console.log(nv, 8899999);
+
+    },
     visibleLocale(nv) {
       if (!nv) {
         this.$emit('update:visible', false)
@@ -495,6 +480,7 @@ export default {
   beforeDestroy() {
     this.SET_SPLIT_VISIBLE(false)
     this.removePictureHandle()
+    socketPositionIndex = 0
     if (orthoManager) {
       orthoManager.clearAll()
       orthoManager = null
@@ -577,9 +563,34 @@ export default {
         return '#336dff'
       }
     },
+    // 操作雷达
+    async handleRadar(row, type) {
+      console.log(row, 8888);
+
+      if (type === 1) {
+        deviceControlTurnon({ payloadId: row.ip }).then(res => {
+          if (res.data.code === 200) {
+            this.$message.success(res.data.message)
+          }
+        })
+      } else if (type === 2) {
+        const bool = await this.$confirm(this.$t('task.radarEndConfirm'), this.$t('task.tip'), {
+          customClass: 'confirm-light',
+          confirmButtonText: this.$t('common.confirm'),
+          cancelButtonText: this.$t('common.cancel'),
+          type: 'warning'
+        })
+        if (!bool) return;
+        deviceControlEndall({ payloadId: row.ip }).then(res => {
+          if (res.data.code === 200) {
+            this.$message.success(this.$t('task.radarEndSuccess'))
+          }
+        })
+      }
+    },
     // 亮度设置变化
     onLightChange: debounce(function (val) {
-      const imageInfos = { ...this.imageInfos }
+      // const imageInfos = { ...this.imageInfos }
       orthoManager.setBrightness(val)
       // execBrightnessexport(imageInfos).then(res => {
       //   console.log('亮度调整成功');
@@ -1087,7 +1098,7 @@ export default {
           console.log('任务列表', res.data.data)
           let data = res.data.data
           let list = []
-
+          socketPositionIndex = 0
           data.forEach(item => {
             // item.check = item.status === 1 || item.status === 3
             item.check = false
@@ -1102,10 +1113,12 @@ export default {
 
             let uav = undefined
             let sar = undefined
+            let ip = undefined
             if (item.uavList.length) {
               uav = item.uavList[0].uavName
               if (item.uavList[0].payloadList.length) {
                 sar = item.uavList[0].payloadList[0].payloadName
+                ip = item.uavList[0].ip
               }
             }
             list.push({
@@ -1119,6 +1132,7 @@ export default {
               statusName: item.statusName,
               uav,
               sar,
+              ip,
               stopTooltipVisible: false
             })
             // TODO
@@ -1141,7 +1155,7 @@ export default {
           this.taskList.data = list
           if (this.taskList.data.length) {
             this.taskList.data[0].check = true
-            if (this.menusChose === '1') {
+            if (this.menusChose === '1' && data[0].mode !== 2) {
               this.addUavToScene(data[0])
               this.addTaskPlanArea(data[0].pointList, data[0].id, data[0].name)
             }
@@ -1569,6 +1583,7 @@ export default {
         //   currentPicture = null
         // }
         this.removeTaskTarget(info.id);
+        socketPositionIndex = 0
         if (orthoManager) {
           orthoManager.clearAll()
           orthoManager = null
@@ -1601,6 +1616,7 @@ export default {
                 viewer.entities.remove(item)
               }
             })
+            socketPositionIndex = 0
             if (orthoManager) {
               orthoManager.clearAll()
               orthoManager = null
@@ -2551,11 +2567,6 @@ export default {
       radarViewer.cesiumViewer.resolutionScale = vtxf_dpr
       radarLayer = new DT.LODSceneLayer()
       radarViewer.addLayer(radarLayer)
-      // radarViewer.cesiumViewer.scene.screenSpaceCameraController.enableTranslate = false
-      // radarViewer.cesiumViewer.scene.screenSpaceCameraController.enableRotate = false
-      // radarViewer.cesiumViewer.scene.screenSpaceCameraController.enableZoom = false
-      // radarViewer.cesiumViewer.scene.screenSpaceCameraController.enableTilt = false
-      // radarViewer.cesiumViewer.scene.screenSpaceCameraController.tiltEventTypes = []
       // 去掉版权
       radarViewer.cesiumViewer._innerCreditContainer.style.display = 'none'
       radarViewer.cesiumViewer.scene.camera.flyTo({
@@ -2673,7 +2684,7 @@ export default {
             let find = taskUavCollection[item.jobId].find(child => child.uavId + '' === item.uavId + '')
             if (find) {
               let position = DT.Cesium.Cartesian3.fromDegrees(item.payloadList[0].longitude, item.payloadList[0].latitude, item.payloadList[0].altitude)
-              find.updateCurrentPosition(position)
+              // find.updateCurrentPosition(position)
             }
           }
           // 位置信息更新到列表
@@ -2719,48 +2730,66 @@ export default {
       })
     },
     updateUavInfo(data) {
+      this.detailUav.statusInfo = []
       this.detailUav.baseInfo.flyHeight = Math.round(data.altitude * 10) / 10
       this.detailUav.baseInfo.longitude = data.longitude.toFixed(3)
       this.detailUav.baseInfo.latitude = data.latitude.toFixed(3)
       this.detailUav.baseInfo.status = data.connected
-      this.detailUav.statusInfo.dev = [
-        // { name: '是否开机', value: this.sarWorkStatus[data.dIsBoot], unit: '' },
-        { name: this.$t('task.fly.clockLock'), value: this.successStatus[data.clockLock], unit: '' },
-        // { name: 'GPU温度', value: '正常', unit: '' },
-        { name: this.$t('task.fly.cpuTemp'), value: data.cpuC, unit: '℃' },
-        { name: this.$t('task.fly.rfTemp'), value: data.rfC, unit: '℃' },
-        { name: this.$t('task.fly.antennaTemp'), value: data.antC, unit: '℃' },
-        { name: this.$t('task.fly.diskTemp'), value: data.diskC, unit: '℃' },
-        { name: this.$t('task.fly.fpgaTemp'), value: data.fpgaC, unit: '℃' },
-        { name: this.$t('task.fly.diskCapacity'), value: data.diskUtilization, unit: '%' },
-        { name: this.$t('task.fly.memoryCapacity'), value: data.memoryCapacity, unit: 'MB' },
-      ]
-      this.detailUav.statusInfo.gps = [
-        // { name: '定位状态', value: '正常', unit: '' },
-        // { name: '定向状态', value: '正常', unit: '' },
-        { name: this.$t('task.fly.rtkStatus'), value: data.rtkStatusLabel, unit: '' },
-        { name: this.$t('task.fly.satelliteNum'), value: data.satelliteNum, unit: '' },
-        { name: this.$t('task.fly.imuStatus'), value: this.imuStatus[data.imuStatus], unit: '' },
-        { name: this.$t('task.fly.date'), value: data.date, unit: '' },
-        { name: this.$t('task.fly.longitude'), value: data.longitude, unit: '°' },
-        { name: this.$t('task.fly.latitude'), value: data.latitude, unit: '°' },
-        { name: this.$t('task.fly.height'), value: data.altitude, unit: 'm' },
-      ]
-      this.detailUav.statusInfo.imu = [
-        { name: this.$t('task.fly.configStatus'), value: '正常', unit: '' },
-        { name: this.$t('task.fly.antennaAzimuth'), value: data.antennaAzimuth, unit: '°' },
-        { name: this.$t('task.fly.antennaPitch'), value: data.antennaPitch, unit: '°' },
-        { name: this.$t('task.fly.eastwardSpeed'), value: data.eastVelocity, unit: 'm/s' },
-        { name: this.$t('task.fly.northwardSpeed'), value: data.northVelocity, unit: 'm/s' },
-        { name: this.$t('task.fly.upwardSpeed'), value: data.skyVelocity, unit: 'm/s' },
-        { name: this.$t('task.fly.pitchAngle'), value: data.anglePitch, unit: '°' },
-        { name: this.$t('task.fly.rollAngle'), value: data.angleRoll, unit: '°' },
-        { name: this.$t('task.fly.yawAngle'), value: data.angleYaw, unit: '°' },
-      ]
+      this.detailUav.statusInfo.push(
+        {
+          label: 'dev',
+          children: [
+            { name: '是否开机', value: this.sarWorkStatus[data.dIsBoot], unit: '' },
+            { name: this.$t('task.fly.clockLock'), value: this.successStatus[data.clockLock], unit: '' },
+            // { name: 'GPU温度', value: '正常', unit: '' },
+            { name: this.$t('task.fly.cpuTemp'), value: data.cpuC, unit: '℃' },
+            { name: this.$t('task.fly.rfTemp'), value: data.rfC, unit: '℃' },
+            { name: this.$t('task.fly.antennaTemp'), value: data.antC, unit: '℃' },
+            { name: this.$t('task.fly.diskTemp'), value: data.diskC, unit: '℃' },
+            { name: this.$t('task.fly.fpgaTemp'), value: data.fpgaC, unit: '℃' },
+            { name: this.$t('task.fly.diskCapacity'), value: data.diskUtilization, unit: '%' },
+            { name: this.$t('task.fly.memoryCapacity'), value: data.memoryCapacity, unit: 'MB' },
+          ]
+        }
+      )
+      this.detailUav.statusInfo.push(
+        {
+          label: 'gps',
+          children: [
+            // { name: '定位状态', value: '正常', unit: '' },
+            // { name: '定向状态', value: '正常', unit: '' },
+            { name: this.$t('task.fly.rtkStatus'), value: data.rtkStatusLabel, unit: '' },
+            { name: this.$t('task.fly.satelliteNum'), value: data.satelliteNum, unit: '' },
+            { name: this.$t('task.fly.imuStatus'), value: this.imuStatus[data.imuStatus], unit: '' },
+            { name: this.$t('task.fly.date'), value: data.date, unit: '' },
+            { name: this.$t('task.fly.longitude'), value: data.longitude, unit: '°' },
+            { name: this.$t('task.fly.latitude'), value: data.latitude, unit: '°' },
+            { name: this.$t('task.fly.height'), value: data.altitude, unit: 'm' },
+          ]
+        }
+      )
+      this.detailUav.statusInfo.push(
+        {
+          label: 'imu',
+          children: [
+            { name: this.$t('task.fly.configStatus'), value: '正常', unit: '' },
+            { name: this.$t('task.fly.antennaAzimuth'), value: data.antennaAzimuth, unit: '°' },
+            { name: this.$t('task.fly.antennaPitch'), value: data.antennaPitch, unit: '°' },
+            { name: this.$t('task.fly.eastwardSpeed'), value: data.eastVelocity, unit: 'm/s' },
+            { name: this.$t('task.fly.northwardSpeed'), value: data.northVelocity, unit: 'm/s' },
+            { name: this.$t('task.fly.upwardSpeed'), value: data.skyVelocity, unit: 'm/s' },
+            { name: this.$t('task.fly.pitchAngle'), value: data.anglePitch, unit: '°' },
+            { name: this.$t('task.fly.rollAngle'), value: data.angleRoll, unit: '°' },
+            { name: this.$t('task.fly.yawAngle'), value: data.angleYaw, unit: '°' },
+          ]
+        }
+      )
       // 更新场景中数据
-      // this.updateSceneUav(data)
+      this.updateSceneUav(data)
     },
     updateSceneUav(data) {
+      console.log(data, 44444);
+
       let position = DT.Cesium.Cartesian3.fromDegrees(data.longitude, data.latitude, data.altitude)
       let entity = viewer.entities.getById('uav-' + data.id)
       if (entity) {
@@ -2770,16 +2799,38 @@ export default {
           id: 'uav-' + data.id,
           position: position,
           label: {
-            text: '无人机' + data.id,
+            text: '无人机',
+            font: '14px sans-serif',
+            fillColor: DT.Cesium.Color.WHITE,
             horizontalOrigin: DT.Cesium.HorizontalOrigin.LEFT,
-            outlineColor: DT.Cesium.Color.BLACK,
-            outlineWidth: 2,
-            pixelOffset: new DT.Cesium.Cartesian2(5, -4),
-            disableDepthTestDistance: 10000
+            verticalOrigin: DT.Cesium.VerticalOrigin.CENTER,
+            disableDepthTestDistance: 100000,
+            pixelOffset: new DT.Cesium.Cartesian2(10, 0),
+            showBackground: true,
+            scaleByDistance: new DT.Cesium.NearFarScalar(0, 1, 1, 0.8),
+            distanceDisplayCondition: new DT.Cesium.DistanceDisplayCondition(0, 20000),
+            backgroundColor: DT.Cesium.Color.fromCssColorString('rgba(0,0,0,0.7)'),
+            style: DT.Cesium.LabelStyle.FILL_AND_OUTLINE,
           },
-          billboard: {
-            image: process.env.BASE_URL + 'static/img/icon_wrj.png',
-            disableDepthTestDistance: 10000
+          model: {
+            uri: process.env.BASE_URL + 'model/uav.gltf',
+            minimumPixelSize: 64,
+            maximumScale: 128,
+          },
+          // point: {
+          //   pixelSize: 40,
+          //   color: DT.Cesium.Color.RED,
+          //   disableDepthTestDistance: 10000
+          // },
+          polyline: {
+            positions: new DT.Cesium.CallbackProperty(function () {
+              return this.positions
+            }, false),
+            width: 8,
+            zIndex: 600,
+            material: DT.Cesium.Color.BLACK,
+            depthFailMaterial: DT.Cesium.Color.CYAN,
+            arcType: DT.Cesium.ArcType.NONE
           }
         })
       }
@@ -2808,7 +2859,7 @@ export default {
         this.detailUav.chart.data[1].data = channel1Real
         this.detailUav.chart.data[2].data = channel2False
         this.detailUav.chart.data[3].data = channel2Real
-        if (this.detailUav.activeNames.includes('4')) {
+        if (this.detailUav.activeNames.includes(4)) {
           if (this.$refs.uavDetailChart) {
             this.$refs.uavDetailChart.updateData(this.detailUav.chart.data)
           }
@@ -3040,12 +3091,19 @@ export default {
               viewer.entities.remove(item)
             }
           })
+          socketPositionIndex = 0
           if (orthoManager) {
             orthoManager.clearAll()
             orthoManager = null
           }
         }
         if (data.jobStatus === 1 && this.detailUav.id === data.jobId) {
+          const job = this.taskList.data.find(el => el.id === data.jobId)
+          // 巡航模式没有指定的任务区域，所以按照socket返回的第一个位置信息来调整相机位置
+          socketPositionIndex++
+          if (job && job.mode === 2 && socketPositionIndex === 1) {
+            this.flyToTarget(data.sarStatus.longitude, data.sarStatus.latitude)
+          }
           this.updateUavInfo(data.sarStatus)
         }
         this.taskList.data[findIndex].status = data.jobStatus
diff --git a/frontend/Skyeye-sys-ui/src/views/home/components/twin-situation/index.scss b/frontend/Skyeye-sys-ui/src/views/home/components/twin-situation/index.scss
index f223a2a..54b6fd7 100644
--- a/frontend/Skyeye-sys-ui/src/views/home/components/twin-situation/index.scss
+++ b/frontend/Skyeye-sys-ui/src/views/home/components/twin-situation/index.scss
@@ -301,7 +301,7 @@
     position: fixed;
     top: 60px;
     right: 10px;
-    height: calc(100vh - 220px);
+    height: calc(100vh - 110px);
   }
 
   .detail-info {
@@ -1045,13 +1045,10 @@
 
   .detail-uav {
     width: 410px;
-    height: calc(100vh - 220px);
+    height: calc(100vh - 110px);
     transition: 0.2s ease-in-out;
     z-index: 2;
 
-    ::v-deep .dt-card__header {
-      display: none;
-    }
 
     .detail-uav__content {
       padding-right: 8px;
@@ -1300,7 +1297,7 @@
   }
 
   &__right {
-    width: 40px;
+    width: 78px;
     height: 100%;
     display: flex;
     justify-content: space-between;
@@ -1354,3 +1351,12 @@
     }
   }
 }
+
+::v-deep .el-collapse-item__content {
+  padding-bottom: 10px !important;
+}
+
+::v-deep .el-collapse-item__header {
+  height: 40px !important;
+  line-height: 40px !important;
+}
diff --git a/frontend/Skyeye-sys-ui/src/views/home/components/twin-situation/index.vue b/frontend/Skyeye-sys-ui/src/views/home/components/twin-situation/index.vue
index 37b4d19..a9e2e14 100644
--- a/frontend/Skyeye-sys-ui/src/views/home/components/twin-situation/index.vue
+++ b/frontend/Skyeye-sys-ui/src/views/home/components/twin-situation/index.vue
@@ -64,6 +64,30 @@
                       @click.stop="stopTask(item, index)"
                     ></i>
                   </el-tooltip>
+                  <el-tooltip
+                    effect="dark"
+                    :content="$t('task.startScan')"
+                    placement="top"
+                    :hide-after="1000"
+                    v-if="item.status === 1"
+                  >
+                    <i
+                      class="el-icon-switch-button"
+                      @click.stop="handleRadar(item, 1)"
+                    ></i>
+                  </el-tooltip>
+                  <el-tooltip
+                    effect="dark"
+                    :content="$t('task.endScan')"
+                    placement="top"
+                    :hide-after="1000"
+                    v-if="item.status === 1"
+                  >
+                    <i
+                      class="el-icon-close"
+                      @click.stop="handleRadar(item, 2)"
+                    ></i>
+                  </el-tooltip>
                 </div>
               </div>
               <p>{{ $t('task.uavName') }}: {{ item.uav }}</p>
@@ -236,8 +260,8 @@
         v-if="detailUav.visible"
         :visible.sync="detailUav.visible"
         :scroll="true"
-        :showClose="true"
-        :showDivider="false"
+        :showClose="false"
+        :showDivider="true"
       >
         <div class="detail-uav__content">
           <div class="other-info">
@@ -245,41 +269,25 @@
               v-model="detailUav.activeNames"
               @change="handleUavDetailCollapse"
             >
-              <el-collapse-item :title="$t('task.statusInfo')" name="3">
-                <el-tabs v-model="detailUav.activeTab">
-                  <el-tab-pane :label="$t('task.dev')" name="DEV">
-                    <div
-                      class="uav-span-wrap"
-                      v-for="item in detailUav.statusInfo.dev"
-                      :key="item.name"
-                    >
-                      <span>{{ item.name }}：</span>
-                      <span>{{ item.value }}{{ item.unit }}</span>
-                    </div>
-                  </el-tab-pane>
-                  <el-tab-pane label="GPS" name="GPS">
-                    <div
-                      class="uav-span-wrap"
-                      v-for="item in detailUav.statusInfo.gps"
-                      :key="item.name"
-                    >
-                      <span>{{ item.name }}：</span>
-                      <span>{{ item.value }}{{ item.unit }}</span>
-                    </div>
-                  </el-tab-pane>
-                  <el-tab-pane label="IMU" name="IMU">
-                    <div
-                      class="uav-span-wrap"
-                      v-for="item in detailUav.statusInfo.imu"
-                      :key="item.name"
-                    >
-                      <span>{{ item.name }}：</span>
-                      <span>{{ item.value }}{{ item.unit }}</span>
-                    </div>
-                  </el-tab-pane>
-                </el-tabs>
+              <el-collapse-item
+                v-for="(item, index) in detailUav.statusInfo"
+                :key="item.label"
+                :title="item.label"
+                :name="index + 1"
+              >
+                <div
+                  class="uav-span-wrap"
+                  v-for="state in item.children"
+                  :key="state.name"
+                >
+                  <span>{{ state.name }}：</span>
+                  <span>{{ state.value }}{{ state.unit }}</span>
+                </div>
               </el-collapse-item>
-              <el-collapse-item :title="$t('task.waveInfo')" name="4">
+              <el-collapse-item
+                :title="$t('task.waveInfo')"
+                :name="detailUav.statusInfo.length + 1"
+              >
                 <div class="wave-chart">
                   <dt-multiple-analysis
                     ref="uavDetailChart"
diff --git a/frontend/Skyeye-sys-ui/src/views/home/components/twin-situation/uavTarget.js b/frontend/Skyeye-sys-ui/src/views/home/components/twin-situation/uavTarget.js
index d76b670..1b04158 100644
--- a/frontend/Skyeye-sys-ui/src/views/home/components/twin-situation/uavTarget.js
+++ b/frontend/Skyeye-sys-ui/src/views/home/components/twin-situation/uavTarget.js
@@ -19,7 +19,7 @@ export default class UavTarget {
     this.addPlanLine(options.airlineList)
     console.log(options, '飞机数据');
     if (options.startLon) {
-      this.addUav(options)
+      // this.addUav(options)
     }
     this.addUavLoader(options.payloadList)
   }
@@ -36,7 +36,6 @@ export default class UavTarget {
     }
     let currentPosition = this.positions[this.positions.length - 1].clone()
     let id = `${this.jobId}~${this.uavId}-uav`
-
     this.uavEntity = this.viewer.entities.add({
       id,
       position: currentPosition,
@@ -46,7 +45,7 @@ export default class UavTarget {
         fillColor: DT.Cesium.Color.WHITE,
         horizontalOrigin: DT.Cesium.HorizontalOrigin.LEFT,
         verticalOrigin: DT.Cesium.VerticalOrigin.CENTER,
-        disableDepthTestDistance: 10000,
+        disableDepthTestDistance: 100000,
         pixelOffset: new DT.Cesium.Cartesian2(10, 0),
         showBackground: true,
         scaleByDistance: new DT.Cesium.NearFarScalar(0, 1, 1, 0.8),
@@ -56,10 +55,14 @@ export default class UavTarget {
       },
       model: {
         uri: process.env.BASE_URL + 'model/uav.gltf',
-        // scale: 1,
-        minimumPixelSize: 32,
-        maximumScale: 128,
+        minimumPixelSize: 128,
+        maximumScale: 256,
       },
+      // point: {
+      //   pixelSize: 40,
+      //   color: DT.Cesium.Color.RED,
+      //   disableDepthTestDistance: 10000
+      // },
       polyline: {
         positions: new DT.Cesium.CallbackProperty(function () {
           return that.positions